Simple Assembly For The Pikler!
Let your child climb to a new adventure! This pikler set supports sensory and motor development, and muscle structure development for children.
Accessory Checklist
Let’s Begin
This step-by-step manual will guide you to put your Pikler together! Once you’re done, your child is free to enjoy endless playtime possibilities!
Step 1
Place all the blocks randomly on the “7” board and screws each one using two “d” screw.
Step 2
Place and secure the two “12” pillar on both sides of the ladder. Screw and tighten a total 5 “c” screw on each side.
Step 3
Once everything is secured tightly, place the climbing board safely aside.
Step 4
Place and secure the provided poles on the arch with 9 “c” screws.
Step 5
Repeat the same action for the other side of the arch.
Step 6
Place and tighten 7 “c” screws on each side of the ladder.
Step 7
Repeat the same action for the other side of the ladder.
Step 8
Place 3 “b” screws on each inner side and tighten the cat lock with the “a” plastic plugs and repeat this action for both sides of the ladder.
Step 9
Place and tighten two “6” screws on both sides of the ladder.
Step 10
Place the climbing board and ladder on the pikler as shown as the image below to complete the assembly.
It’s Playtime!
