For The Multi Activity
Table with Chairs!
With the Multi Function Table, your kids will have the space to reach their potential independently. It also allows them to quietly practice their passions, such as arts and crafts and reading.
This step-by-step manual will guide you to put your multi activity table together!
Find the B boards & C connector boards and place them together.
Use two (2) screws to install C connector board on one side of B board. Repeat on the other side.
Use two (2) screws to install the other B board with a C connector board on one side.
Repeat the same action to install the B board to the C connector board with four (4) screws (2 on each side).
Place the D connector board in the middle of the table (as shown in the diagram above). Secure the table with four (4) screws, two (2) in the front and two (2) in the back of the D connector board.
Place & insert all the plastic nails inside the C board sockets. You will need a total of eight (8) plastic nails to install the first layer of the C connector board.
Make sure that the plastic nails face down.
Take and place the A board into the table.
Insert the chess paper card on top of the A board.
Place the lego table board inside the table.
Insert eight (8) plastic nails to the second layer of the C connector board.
Place another A board on the top of the table to complete the installation.
Flip the A board to reveal the drawing board.
Find the chair seat, chair backrest and chair legs and place them together.
Insert and secure the four (4) legs into the chair seat.
Insert the chair backrest into the chair seat.
Press & Raise the button on bed support to adjust the height.
Chair installation complete. Repeat the same instructions for the rest of the chairs in the set.
Complete the installation for bassinet.