Free Shipping Across Continental USA | Starts in

Days
Hours
Minutes
Seconds

Set Up Your Convenient Stroller In A Flash!

Keep your baby safe and comfortable when you’re out running errands!

Our full-sized strollers are designed to ensure you can take your little one for a stroll without a single worry.

Play Video

Accessory Checklist

Detachable Individual Parts:

  • Wheel
  • Storage basket
  • Integrated seat
  • Armrest
  • Awning

Let’s Begin

Follow this simple step-by-step guide on how to set up your stroller, and get ready for fun outings with your bundle of joy!

Step 1

As shown in the image, press the safety button “a”, then squeeze the retract button “b”. Then press the push handle to fold it.

Step 2

As shown in the image, press the front wheel quick release button “c” to remove the front wheels. When installing, just insert the front wheel in the direction shown in the figure. Pull the button “d” up or down to achieve the preferred front wheel orientation.

Step 3

Press the rear wheel quick release button “e” as shown in the image to remove the rear wheel. When installing, place the rear wheel in the direction as shown in the image.

Step 4

As shown in the image, lightly lift the canopy strip in the direction of the arrow. When installing, align the canopy strip with the frame canopy strip seat and insert it.

Step 5

Press the small button on the armrest plug as shown, and then lift it up to remove the armrest. When installing, align the armrest plug with the frame armrest socket and insert it.

Step 6

As shown in the image, adjust the length of the lower support plate of the cloth cover depending on the needs of your baby. After the car is folded, the handle can be pulled out for easier transport.

Step 7

Press the center of the seat belt buckle to unlock the seat belt. When you hear a click, the safety buckle is locked.

Step 8

As shown in the image, firstly insert the “8” button into the socket of the cloth cover. After passing through the partition of the cloth cover, swipe it horizontally to lock it. When taking it out, reverse the operation. You can adjust the position of the socket according to the needs of the baby.

Step 9

Pull the adjustment belt with your left hand as shown in the image, then pinch the adjustment belt with your right hand, and slide the buckle to the proper position to adjust the backrest angle.

Step 10

Insert the safety shoulder strap into the belt, and then insert the belt socket until it locks.

Step 11

Press down on the brake pedal to lock the rear wheels. Press in the opposite direction to unlock the wheels.

Step 12

As shown in the image, hang the cloth cover and the “ears” on both sides of the awning on the hooks corresponding to the frame. The buttonholes on the cloth cover and the frame hooks should be fastened tightly. When removing, just peel off the buttons.

It’s Playtime!

Search for Products

Search

Become an Ambassador

Please fill out the below form and One of our agents will be with you shortly.

Become an Influencer

Please fill out the below form and One of our agents will be with you shortly.

Become a Retailer

Please fill out the below form and One of our agents will be with you shortly.